How To Change Your Windshield Wipers

An important safety feature to every car, windshield wipers enhance your vision while driving in rain, fog and help you to keep the glass clean for a clearer view.

They’re an absolute necessity!

The problem is that just like everything else even these wipers do not last forever. If the windshield wipers of your car are already streaking water, getting squeaky or leaving a milky film while wiping out, you know that you need to get them changed ASAP.

These significant safety tools need replacing once in every few years as the rubber blades dry out over time due to regular usage or exposure with the sun. Once they stop performing well, you ought to get the new ones to protect your car glass. But before you decide to buy the new ones you can try to remove the dirt and hardened rubber stuck in the blades for their better functioning. These little hacks sometimes work really well to enhance the life of your old wipers.

There are times when you can’t help but have to change the old wiper with the new one when it’s no longer in use. So, let’s understand how you can replace your windshield wipers easily and efficiently.

Step1: Buy New Blades

There, if you’re planning to buy the new blades, make sure you know the exact model of your car. The model name, make, year and further specifications- all of it!

Give this information to the nearest auto body shop executive and ask for options. Richmond hill auto glass is one such place to go to for quality replacing and repairing services. However, you can also buy the blades and change them yourself. The blades will range from a bare minimum of $5 to $25 at Richmondhillautoglass or any other good auto body store. A good move is to go with a medium quality blade which is not too cheap and not too expensive. Also, prefer getting both the blades replaced at once, if one has gone bad, the other can’t do much better.

Step 2: Remove The Old Wipers

Pull the entire assemble of the wiper up so that it gets vertical. Then move the blade making a perpendicular angle with the arm. The hinge will be visible and you will notice a small tab on one side of the hinge. Get that tab out and get the wiper down towards the car.

Next, remove the blade through one of the holes on it once the blades and arms are separated from one another. As the blades are removed, the wiper arms become like unprotected metal, therefore, don’t leave the arm up. They will ruin your windshield if they feel down on it. Try laying it down in a way that it catches the arm incase it falls down.

Step 3: Attach The New Blades

Now, take the new wiper and put the arm using the appropriate hole so that it pushes the wiper up.

To see which hole it goes through, turn the hinge perpendicular to the arm and push it up so that the arm’s hook gets over the hinge. As the arm gets inside the hole, put the hook over the hinge and push them together. You’ll hear a peculiar click sound once it’s done. Perhaps you’ll observe a huge different in their performance level when compared to the older ones.

Put the arm down, rinse it, repeat it and you’re all set to use your new wipers!

You can choose to throw your old wipers or reuse them somewhere else. For instance, you can use them to clean your bathroom glass or turn them into a tension wrench or something out of your creativity. All that depends on what you would want to do with them.

Hope this information help you!

Drop your reviews and suggestions in the comments section below.